| Model |
WI-PS212GF-I |
| Hardware Version |
V2 |
| Interfaces |
| Downlink Ports |
8*10/100 Base-TX PoE RJ-45 (Auto-MDI/MDI-X) |
| Uplink Ports |
1*1000 Base-T RJ45 1*1000 Base-X SFP Slot |
| PoE |
| PoE Standard |
Port 1-2: IEEE 802.3af/at/bt 90W PoE Port 3-8: IEEE 802.3af/at 30W PoE |
| PoE Power Supply Type |
End-span and Mid-span |
| PoE Pin Assignment |
802.3af/at: 1,2 (+), 3,6 (-) 802.3af/at/bt: 3, 6, 4, 5 (+), 1, 2, 7, 8 (-) |
| Switch Property |
| Standards |
IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet Plus IEEE 802.3bt Power Over Ethernet Plus Plus |
| Forwarding Modes |
Store and Forward |
| Packet Buffer |
1Mbit |
| MAC Table |
8K |
| Switching Capacity |
5.6Gbps |
| Packet Forwarding Rate |
14.9Mpps |
| Jumbo Frame |
9216bytes |
| Power Supply |
| Input Voltage |
Power 1,2,3 : 48~57V DC (PoE Switch),12~48V DC (Non-PoE Switch) |
| Power Consumption |
Full loading without PoE ≤ 8W PoE power budget ≤ 360W |
| Reverse polarity protection |
Support |
| Power Adapter (Included) |
| Input Power |
AC 100-240V 50/60Hz |
| Output Power |
52V 1.86A (-30~65℃) 52V 2.30A (0~50℃) |
| Environmental Reliability |
| Protection |
Surge Immunity: 6kV/2kV |
| ESD Protection: 8kV contact discharge/ 15kV air discharge |
| Operating Temperature |
-30℃~65℃ |
| Storage Temperature |
-40℃~85℃ |
| Operating Humidity |
5%~95% (Non-condensation) |
| LED Indicators |
| P (Power indicator) |
Off: the device is power off or failed Green On: the device power on is normal |
| Link |
Off: port link down On: ports link up Blinking: data on TX/RX |
| Uplink |
9-10 uplink ports Off: port link down Green On: port link up Green Blinking: data on TX/RX |
| Dimensions (W*D*H) |
138*108*44mm |
| Net Weight |
| Installation |
Desktop/DIN-rail/wall mounting |
| Certifications |
| Certifications |
CE, FCC, RoHS |
